If you’re an Infiniti Q50 or Q60 owner running the 3.0T VR30 twin-turbo engine, you know that unlocking its full potential starts with fixing the intake system. The factory airbox and piping are designed for noise reduction and emissions—not performance. Our factory-engineered high-flow air intake kit is built specifically for the VR30 platform, replacing restrictive stock components with silicone piping and a reusable high-flow filter to boost airflow, reduce heat soak, and unlock the true power of your engine.
As a manufacturer specializing in performance parts for the VR30 community, we’ve engineered this kit to deliver measurable gains in throttle response, horsepower, and turbo spool speed. Whether you’re daily driving or tuned for more power, this intake is designed to make your Q50/Q60 feel alive again.
Why Upgrade Your VR30 Air Intake?
The stock intake on the Q50/Q60 VR30 has several critical limitations:
- Restrictive Airbox & Filter: The factory airbox is small and restrictive, limiting airflow to the turbos and causing unnecessary lag.
- Heat Soak Issues: Plastic piping and a closed airbox trap engine bay heat, raising intake air temperatures (IATs) and reducing power output.
- Poor Filtration Efficiency: Stock filters are prone to clogging, which further reduces airflow and performance over time.
Our high-flow air intake solves these problems by delivering:
✅
30-40% Increased Airflow: Smooth silicone piping and a large, high-flow filter eliminate restrictions, allowing the turbos to breathe freely.
✅
Reduced Heat Soak: The open-air design draws in cooler air from outside the engine bay, lowering IATs by up to 25-35°F.
✅
Faster Turbo Spool: Improved airflow reduces turbo lag, making throttle response sharper and more immediate.
✅
Direct Bolt-On Fitment: No cutting, drilling, or modifications required—designed to work with factory mounting points and sensors.
Premium Build: Silicone Piping & High-Flow Filter
Every kit is built with VR30-specific materials to handle the demands of twin-turbo performance:
Reinforced Silicone Intake Piping
- Heat & Vibration Resistant: Multi-layer reinforced silicone is built to withstand the VR30’s high under-hood temperatures and constant vibration, resisting cracking, warping, or leaks.
- Smooth Mandrel-Bent Design: No sharp bends or flow restrictions—air flows straight through the pipe to the turbos, minimizing turbulence and maximizing efficiency.
- OEM Sensor Ports: Pre-molded sensor bungs for the VR30’s MAF and vacuum sensors ensure plug-and-play compatibility with factory electronics, no error codes.
Reusable High-Flow Air Filter
- High Filtration Efficiency: The included blue cotton filter traps dirt and debris while allowing maximum airflow, protecting your turbos and engine.
- Washable & Reusable: Unlike disposable paper filters, this filter can be cleaned and reused multiple times, reducing long-term maintenance costs.
- Sealed Fitment: The filter housing creates a tight seal to prevent unfiltered air from entering the engine.
Compatible Infiniti VR30 Models
This intake kit is precision-engineered for the following Infiniti 3.0T VR30 applications:
- Infiniti Q50 3.0T (2016-2023, VR30DDTT)
- Infiniti Q60 3.0T (2017-2023, VR30DDTT)
It works with both base 300hp and Red Sport 400hp variants, and is compatible with most ECU tunes and turbo upgrades.
Key Performance Benefits
- Measurable Power Gains: Improved airflow unlocks 8-15 HP and 10-18 lb-ft of torque, with even bigger gains when paired with a tune.
- Sharper Throttle Response: Reduced turbo lag makes your VR30 feel more responsive and lively, especially in the mid-range.
- Cooler IATs & Consistent Power: By drawing in cooler air, the intake prevents heat soak during spirited driving, ensuring consistent performance.
- Enhanced Turbo Sound: The open filter design produces a deeper, more aggressive turbo spool sound, adding a sporty tone to your VR30.
- Long-Term Reliability: Durable silicone piping and a reusable filter mean fewer maintenance headaches and consistent performance for years.
Factory Direct & Wholesale Support
As a manufacturer, we offer more than just parts—we offer solutions for the VR30 community:
- Bulk & Wholesale Pricing: Ideal for tuner shops, performance dealers, or group orders. Contact us for custom quotes.
- Custom Options: Choose from black, red, or blue silicone piping to match your engine bay aesthetic.
Ready to Unlock Your VR30’s True Potential?
If you’re tired of the stock intake holding your Q50/Q60 back, our high-flow air intake kit is the upgrade you’ve been waiting for. It’s designed to deliver real performance gains, improve throttle response, and keep your VR30 running cooler and stronger.
